Instructions for Inside Mounted Sheer Shades
Depth Requirements
- For an inside mount, you’ll need to make sure the window frame is deep enough to accommodate sheer shades. Read more about this by visiting the "Specifications" tab on the sheer shade’s main page.
Measuring the width
- The width measurement is found by measuring the inside of the window frame in three locations – the top, middle, and bottom. Choose the smallest of these measurements.
- If you get a 1/16" or 1/32" increment, round down to the nearest 1/8". (For example, if the smallest measurement is 24 9/16", round down to 24 1/2". If it's 24 3/8", no need to round down.)
- And that’s it! That’s the width measurement you’ll use when placing your order for sheer shades.
Measuring the height
- The height measurement is found by measuring the inside of the window frame in three locations – the top left, center, and the top right. Choose the largest of these measurements.
- If you get a 1/16" or 1/32" increment, round up to the nearest 1/8". (For example, if the largest measurement is 24 9/16", round up to 24 5/8". If it's 24 1/2", no need to round up.)
- And that’s it! That’s the height measurement you’ll use when placing your order for sheer shades.
Don’t worry about making your own deductions. We’ll take care of that for you automatically. Do not make your own deductions. Do not add to the width to make up for any deductions. If you would like more light coverage, consider an outside mount. See chart below for the deductions per collection (Deductions may vary +/- 1/8"):
Instructions for Outside Mounted Sheer Shades
An outside mount sits outside of the window and the window frame. Because it is meant to cover the entire space of the window, and more, you’ll need to make some additions to the measurements to make sure you order the right size.
Flat surface requirements
- Visit the "Specifications" tab on your sheer shade’s page to find out about the flat surface requirements for an outside mount. Usually, you’ll need about 1” of flat wall to make it work.
Measuring the width
- The width is found by measuring the top, middle, and bottom of the window.
- You’ll use that measurement and add the recommended minimum of 4 inches. This will ensure the window is properly covered.
- Here’s your width for your sheer shades.
Measuring the height
- The height is found by measuring the top left of the window to the bottom, the middle, and the top left.
- You’ll use the largest of the three measurements and add the recommended minimum of 4 inches. This will ensure the window is properly covered.
- Here’s the height for your sheer shades.
