Eco Guard Window Shutters

Recommendations

When you insulate your windows with ShutterSmart EnergyGuard x SelectBlinds, you can qualify to earn a tax credit of 30% of the cost of the shutters and up to a maximum of $1200.
Download your Window Insulation System 2024 Manufacturer’s Certification to receive your tax credit. These tax credits apply to all purchases that are installed by December 31, 2024.
When considering an inside mount frame, you should also measure on the diagonal (from corner to corner) each way. If the measurements are off more than 1/2", you should consider ordering an outside mount frame.
If your windows tilt in, you should consider an outside mount frame. An inside mount frame will prevent you from opening your windows.
Trim molding can affect the installation of your shutters. Ideally, not having trim molding works best.

If you window has a sill then you need to choose the 4 Sided w/ Sill Frame option to ensure your shutters can be installed properly.
27" maximum width for single panel.
Pre-drilled installation holes are strategically placed on all frames for accurate, quick and clean installation. Some assembly is required.
Inside Mount Shutters receive a frame deduction to the width and height of 1/4" for Z-Frame and Trim Frame, and 3/16" for L-Frame.
Cancelling an order within the first 3 days will incur a 50% restocking fee. Orders cannot be canceled after 3 days.

To avoid light gaps around the frame, consider ordering an outside mount frame.
When ordering outside mount shutters, please ensure you read our Measure & Install tab to ensure you are entering the correct measurements for your shutters.
Shutters over 62" in height need to have a dividing rail.
Specify the dividing rail location by providing the distance from the bottom of the shutter to the mid point of where the dividing rail will go.
Dividing rail position will vary slightly depending on louver size. 3" louvers will vary up to 1 1/4" from the specified position, and 4" louvers will vary by up to 1 3/4".
To avoid excess louver overlap, a minimum of 16" is required between divider rail and the top/bottom rail of the shutter.
When ordering adjacent shutters in the same room, to achieve a uniform appearance you must specify that all adjacent shutters and their divider rails be the same height.
Measuring for shutters is very important. Please ensure you are selecting the correct measurements above. Don't hesitate to give one of our shutter experts a call at 888-257-1840 and we can help guide you though the process. Check out our Measure & Install tab for more information.

Frame Type	4 Sided	4 Sided with Sill
L-Frame (Outside Mount)	Add 4" to your window width & height	Add 4" to your window width & 2" to your height
Designer Frame	Add 5" to your window width & height	Add 5" to your window width & 2 1/2" to your height

Depth

Height

Width

Height

Width